• Sign up or login, and you'll have full access to opportunities of forum.
Go to CruxDreams.com
Work in progress....staining the Stipes,etc....
1: The Crucifix,as it currently looks...the colour difference is pretty obvious !!
2 : Testing the new "Ronseal" woodstain.....
3-6 : Before,during,and after....(note the guide,as to which end is rear-facing....)

20190606_080110.jpg20190606_075954.jpg20190606_081744.jpg20190606_082959.jpg20190606_082029.jpg20190606_083505.jpg
Now to let it dry....... :)
 
Last edited:
Dear diary......Well I was quite busy !! :) ;)
Firstly I woodstained the replacement Stipes.
Then,(after it had dried) I drilled out several bolt fitment holes....(using the previous Stipes for location points)
Next i fashioned a new,shorter footrest support....
Replaced the footrest upon the support.
"Yep looks o-kay....!!"
Now the awkward bit.....using the original piece of wood,as a guide,measured and cut the Stipes to fit inside the door frame .
(Please,God,let it fit PROPERLY ,this time !!)
Nervous moment as I offered up the wood to the frame.....
It FITS !! :aaaaa:
But....the carpet gripper,on the floor is interfering with the actual fit,especially once the two main components are bolted together !! "Oh....F.F.S !!":cursing2::BangHead::BangHead:
Okay well it was time to get ready for work.....so will resume next day :(
(once "Her-Downstairs" has gone out.....)

1: Here's what the Crucifix looks like at present....
2: The problem with the carpet gripper...& where it needs cutting. (support temporarily removed,for access)
20190607_100418.jpg20190607_100350.jpg
 
Quick Update.....
Managed to cut away the obstructing part of the carpet gripper. :)
Am contemplating getting a couple of metal plates,top & bottom to aid stability....off to work now,so suspending things until tomorrow. B.x
20190607_145919.jpg
 
A question,for my readers.....
Here's a couple of early pics,of yours truly, buck naked Crux-style...
Pic A : As nature intended.... ;)
View attachment 713137


Pic B : A censored version, for decency purposes (!!)
View attachment 713138

WHICH WOULD YOU PREFER TO SEE....??
I cant believe anyone on this site would be offended. I am not into men, but I wouldn't mind making you suffer since you are bound and helpless. A naked man man crying is somewhat erotic.
 
GRRRRRR !! For F*cks SAKE !!
Apparently it seems that the combination of metal plates,top and bottom,make for an impossible fit !!
:BangHead::cursing2::crybaby2:
Looks like I'll have to shave a bit off,the top end of the Stipes.
(but I must keep checking the fit !!)
Or.......not bother with the top bracket :( :(
"Bollocks !!"......
20190608_000808.jpg20190608_000755.jpg

1: The metal foot plates,screwed into the base,to hold the carpet in place,
(theoretically....)
2: The supporting bracket,to stop Cross sliding out,(theoretically....) !!
 
Last edited:
I'm bored..... :(
Work is currently suspended while I acquire some more bits and pieces,plus review my strategy regards construction/fitment.
Here's a few more pics,of this despicable piece of scum,and his deserved fate. etc.etc...
Spot the odd one out.... ;)
20190520_140616.jpg20190520_143629.jpg20190430_104631.jpgcx_crucified-slut_b_C_03-1.jpg20180809_112456.jpg20190528_001911.jpg20190606_015301.jpg20190528_002958.jpg20190601_120132.jpg20190527_234240.jpg
 
GOOD NEWS......
It's all done now..... :) the reassembled Crucifix is now fitting snugly into the door frame.I had to shave the uneven top,so that it was flat and very slightly reduced in height.....
I even added 10 equidistant holes in the upright,to adjust the "Cornu" position, depending on the height of person,or the standing situation.( whether on footrest,or upon ground)
Now all Baracus needs to do is undergo yet another Crucifixion !! Lol.
The last thing left to do...is to put up the black background. Fun & games....!!
20190609_184248.jpg20190609_184326.jpg

Pic 1 : The new "Cornu" and 10 equidistant holes
Pic 2 :The Crucifix,in all it's glory !! :)
 
GOOD NEWS......
It's all done now..... :) the reassembled Crucifix is now fitting snugly into the door frame.I had to shave the uneven top,so that it was flat and very slightly reduced in height.....
I even added 10 equidistant holes in the upright,to adjust the "Cornu" position, depending on the height of person,or the standing situation.( whether on footrest,or upon ground)
Now all Baracus needs to do is undergo yet another Crucifixion !! Lol.
The last thing left to do...is to put up the black background. Fun & games....!!
View attachment 715403View attachment 715404

Pic 1 : The new "Cornu" and 10 equidistant holes
Pic 2 :The Crucifix,in all it's glory !! :)

Splendid, Baracus. I hope it brings you much pleasure and excitement. Maybe you will even share it with some of the UK crew here? The cornu looks quite solid and very adjustable, just what you need :D

May I be pedantic about your last point? What you show us in these pictures is the cross. It is not a crucifix. To be a crucifix in all its glory it lacks just one thing, Baracus.
You!
A crucifix is a cross with a figure on it :)
 
Last edited:
Back
Top Bottom